Cables to Go 30534 User Manual

Video ServerDigital Encoder & DecoderUser Manual Please carefully read these instructions before using this product. Save this manual for future

10 Logout ... 56 Specifications .

30534AA 11 INTRODUCTION OVERVIEW The VS201 one channel network encoder is designed to integrate with existing systems, or install with a new system.

12 GETTING STARTED PACKAGE CONTENTS Before proceeding, please check that the box contains the items listed here. If any item is missing or has defect

30534AA 13 SETUP AND CABLE CONNECTION Before installing or connecting the video server, please refer to this section. Video Server Setup Dimensions

14 Connector Definition Front Connector Pin Definition DC 12V OUT - Power Output Connection LINE OUT - Audio Output MIC IN / LINE IN - Audi

30534AA 15 Rear Connector Pin Definition NETWORK / PoE - RJ-45 10/100 Mbps Ethernet / PoE DC 12V IN - Power Input RS-485 1 D+ 2 D- 3 RS-

16 Video Server Cable Definition and Requirements The Network Video Server requires a network cable to carry the video signals to the remote viewing

30534AA 17 The Orange activity light flashes to indicate network activity. CAMERA FINDER SECURGEN IP FINDER Use the included IP Finder software to e

18 Changing the Network Type You can change the network type from Static IP to DHCP easily from the list of connected IP devices. To change the netwo

30534AA 19 VIEWER SOFTWARE You must install the viewer software on your PC or DVR to configure the device. The viewer software will install automati

2

20 Home Screen Size Adjustment – Click the screen size buttons to adjust image display size x1/2 and full screen. Digital Zoom Control – In full s

30534AA 21 Snapshot – Click the button, and a JPEG snapshot will automatically be saved in the appointed place. The default location is: C:\. Note

22 System Note The System tab is only accessible by the Administrator. System Host Name – The Host Name is used to identify the network device on

30534AA 23

24 Security Admin Password To change the administrator password, type a new password in the Admin Password box and confirm below. Note The maximu

30534AA 25 Add User The user name and passwords are limited to 16 characters. There is a maximum of twenty user accounts 1. Type the new User name

26 Network You can choose to use a fixed IP address or a dynamic IP address (assigned by a DHCP server or router) for the network device. Get IP

30534AA 27 Use fixed IP address To set up a new static IP address: 1. Select the Use fixed IP address option. 2. Type a new IP address in the IP a

28 Note The MJPEG over HTTP port must not be the same as the web server port. DDNS DDNS (Dynamic Domain Name Service) is a service that allows a con

30534AA 29

30534AA 3 1 Channel Network Encoder (NE-VS201) User Manual Manual Edition 30534AA – OCTOBER 2010 ©2000-2011, SECURGEN All Rights Reserved. No

30 Mail The network device can send an e-mail via Simple Mail Transfer Protocol (SMTP) when motion is detected or when the sensor input is activated.

30534AA 31 FTP The network device can send alarm message to a specific File Transfer Protocol (FTP) site when motion is detected or when the sensor

32 Application (Alarm Settings) The video server is equipped with one alarm input and one alarm output to connect to an alarm system to capture alarm

30534AA 33 • Send Message by FTP/E-Mail – Select to send an alarm message to the configured FTP and/or E-Mail when an alarm event occurs. • Upload

34 Motion Detection Motion Detection allows the video server to detect motion and trigger alarms when motion in the detected area exceeds the determi

30534AA 35 When motion detection is activated, the Motion pop-up window will open. When motion is detected, the signals will be displayed on the M

36 • Time interval (sec) [0-7200] – The default interval is 10. The value is the interval between each detected motion event.

30534AA 37 Triggered Action You can specify which actions the network device should take when motion is detected. • Enable Alarm Output – Select th

38 Storage Management The video server has an integrated microSD™ card slot that can be used to record video or images. The card slot is compatible w

30534AA 39 Note If you are using Windows Vista or 7, you will need to change the Snapshot location. Windows UAC does not allow internet programs to

4 Important Safeguards 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save

40 Camera Control When connecting a PTZ camera to the RS-485 control, use the camera control page to set up the camera information. Enable the PTZ Ca

30534AA 41 File Location The video server supports a JPEG snapshot and AVI recording function. You can specify a storage location for the saved file

42 View Log File Click View Log File to view the system log file. The content of the file provides useful information about configuration and connect

30534AA 43 View User Information The Administrator can view each user’s login information and privileges on the View User Information page View Use

44 View Parameters Click View Parameters to view the system parameter settings.

30534AA 45 Factory Default Use the factory default page to reset the video server to factory default setting if necessary. Set Default Click Set

46 Software Version The Software Version page displays the current software version.

30534AA 47 Software Upgrade Upgrading the Video Server Viewer Software Note Make sure the new firmware file is available before starting a softwar

48 6. Open the internet browser again and log in to the network device. The system will automatically download the new version of the Camera Viewer

30534AA 49 Maintenance Export the current configuration of the video server or import a configuration. Note Do not import the configuration from a

30534AA 5 Installation and Storage • Install electricity wiring carefully. Please note that input electricity to the unit is at tolerance of DC 12V

50 Video and Audio Streaming Settings On the Streaming tab, you can configure specific video resolution, video compression mode, video protocol, and

30534AA 51 Video Deinterlace – The video server supports de-interlacing. You can choose to activate the de-interlacing function or disable the funct

52 • Middle compression, default • Low compression, highest quality Video OCX Protocol On the Video OCX protocol page, you can select different pro

30534AA 53 1. Enter all required data, including multicast IP address, H.264 video port, MJPEG video port, audio port and TTL into each box. 2. Cl

54 Video Frame Skip Use video frame skipping to save bandwidth if necessary. MJPEG/H.264 Frame Skipping options include: • No skipping, default •

30534AA 55 Audio The audio setting page is show as below. In the Audio page, the Administrator can select one transmission mode and audio bit rate.

56 PTZ Settings Use the PTZ tab to program a PTZ camera using the on screen menu of the camera. OSD Menu Click Menu to open the OSD menu of the ca

30534AA 57 SPECIFICATIONS VIDEO SERVER SPECIFICATIONS Model NE-VS201 Video Input 1CH BNC Video Output 1CH BNC loop out Compression H.264 / MJPEG Dua

58 Recommended Application Fixed Dome Cameras. Do not use to power more than one other device.

30534AA www.securgen.com 1-888-542-1103 © 2011 Securgen All rights reserved. No part of this publication may be reproduced by a

6 Warning DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE HOUSING. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Caution

30534AA 7 Standard Warranty Serurgen warrants all new products to be free from defects in workmanship and material under normal use for a period of

8 TABLE OF CONTENTS Table of Contents ...... 8 Introduction ...

30534AA 9 Admin Password ........................ 24 Add User .....