Cables to Go 30534 Instruction Manual download pdf (Page 12)

English - 11 -

Note: Remove the battery from remote control

handset when it is not to be used for a long period.

Otherwise it can be damaged due to any leakage of

batteries. Remote range is approximately 7m/23ft.

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz. •

Switch the “•

” button to position “|” so the TV

will switch to standby mode. Then the standby LED

lights up.

To switch on the TV from standby mode either:•

Press the “•

” button, P+ / P- or a numeric button on

the remote control.

Press the • -P/CH or P/CH+ touch button on the TV. The

TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/

DOWN buttons on the remote control or on the TV

set, the programme that you were watching last will be

reselected.

By either method the TV will switch on.

To Switch the TV Off

Switch the “• ” button to position 2 as illustrated,(

) so the TV will switch off. .

To power down the TV completely, unplug the •

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active.

The LED can also blink when you switch on the TV from

standby mode.

Digital Teletext (** for UK only)

Press the “• ” button.

The digital teletext information appears.•

Operate it with the coloured buttons, cursor buttons •

and OK button.

The operation method may differ depending on the

contents of the digital teletext.

Follow the instructions displayed on digital teletext

screen.

When the “•

” button is pressed, the TV returns to

television broadcasting.

With digital terrestrial broadcasting (DVB-T), in •

addition to digital teletext broadcasting together with

the normal broadcasting, there are also channels

with just digital teletext broadcasting.

The aspect ratio (picture shape) when watching •

a channel with just digital teletext broadcasting is

the same as the aspect ratio of the picture viewed

previously.

When you press the “• ” button again, the digital

teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to

the analogue text system. Please do refer to the

“TELETEXT” explanations.

Input Selection

Once you have connected external systems to

your TV, you can switch to different input sources.

Press “SOURCE” button on your remote control

consecutively for directly changing sources.

You can operate your TV using both the remote control

and onset buttons.

Operation with the Buttons on the TV

Volume Setting

Press “• ” button to decrease volume or “

” button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

Press “• P/CH +” button to select the next programme or

“P/CH -” button to select the previous programme.

Viewing Main Menu

Press the “• V+”/”V-” button at the same time to view

main menu. In the Main menu select sub-menu using

“AV” button and set the sub-menu using “

” or

“

” buttons. To learn the usage of the menus,

refer to the menu system sections.

AV Mode

Press the “• AV” button in the control panel on the TV

to switch between AV modes.

Operation with the Remote Control

The remote control of your TV is designed to control •

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

Volume Setting

Press “• V+” button to increase the volume. Press “V-”

button to decrease the volume. A volume level scale

(slider) will be displayed on the screen.

MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 11MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 11 27.10.2010 15:04:2727.10.2010 15:04:27

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Comments to this Manuals

No comments

Cables to Go 30534 Instruction Manual Page 12

Comments to this Manuals