Cables to Go 30534 Instruction Manual download pdf (Page 9)

English - 8 -

SPDIF Coaxial Out5. outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input

RF Input6. connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

PC Input7. is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

HDMI 1: HDMI Input8.

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of

displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD

Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets

can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI

connection.

HDMI 2: HDMI Input9.

HDMI 3: HDMI Input10.

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.

channels that you subscribe to. For more information, see “Conditional

Access” section.

Side USBs2.

Side HDMI Input is for connecting a device that has an HDMI socket.3.

Headphone jack is used for connecting an external headphone to the system. 4.

Connect to the HEADPHONE jack to listen to the TV from headphones

(optional).

Video Input is used for connecting video signals of external devices.Connect the video 5.

cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices. Connect the audio 6.

cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.

Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect

your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Standby switch is used for turning the TV on or off7. .

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •

mains. Plug the power cable to the mains socket outlet.

Aerial Connection

Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•

HDMI 3

5Vdc-Max500mA

MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 8MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 8 27.10.2010 15:04:2427.10.2010 15:04:24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Comments to this Manuals

No comments

Cables to Go 30534 Instruction Manual Page 9

Comments to this Manuals